Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateKwikset Locksmith in Cedar Hills, OR | Commodore Locksmith
We provide independent Kwikset locksmith service across Cedar Hills, from rekeying a 1960s builder-grade knobset to installing a current SmartCode keypad deadbolt. What makes our Kwikset work different here is simple: most Cedar Hills homes still carry their original hardware, and that hardware has been fighting Willamette Valley damp for fifty years. We know which Kwikset cylinders will still hold a fresh pin kit and which ones need to come out before they fail on you at the worst possible time. Call (855) 473-5097 for a straight answer and a free estimate.
We’re an independent Kwikset service provider. We are not affiliated with, authorized by, or endorsed by Kwikset. That independence means we tell you the truth about your hardware, including when a repair is throwing good money after bad. If the lock is giving you trouble, that’s what we’re here for.
Why Cedar Hills Residents Choose Us for Kwikset Service
Kwikset is the lock brand we see most often in Cedar Hills, and we’ve worked on every generation of it. The 400 Series Signature knobsets that builders installed in the 1960s and 70s, the 660 and 780 deadbolts that came after, and the SmartCode 913 and 914 keypads going on doors today. That range matters because the failure modes differ by era. A 1971 knobset and a 2021 keypad do not break the same way, and a locksmith who only knows the new stuff will misdiagnose the old stuff.
Glen Macready grew up in Gresham’s Centennial neighborhood and learned the trade through the vocational programs at Mt. Hood Community College before spending years working every lock situation the Portland metro area could throw at him. He still lives a few blocks from his old high school. When a Cedar Hills homeowner describes a stiff Kwikset key or a deadbolt that catches, he knows exactly what they mean before he arrives. We stock genuine Kwikset OEM cylinders, pin kits, and latches for fast turnaround, and we carry quality aftermarket full locksets for the times when replacement is the honest call.
We also work the full security spectrum: Kwikset, Schlage, Yale, Baldwin, Medeco, Mul-T-Lock, Sargent, and Abloy, including Kwikset in West Haven. From your front door to your car door, it’s the same discipline. Know the mechanism before you touch it.
Styles & brands we work with
Common Kwikset Locksmith Problems We Solve in Cedar Hills
- Worn 400 Series cylinders that won’t hold a rekey. Original builder-grade Kwikset knobsets have brass cylinders. After 50-plus years of daily key turns, the chambers wear and the pin stacks get loose. A fresh pin kit simply won’t seat reliably. We replace the cylinder with a genuine Kwikset OEM unit and keep the original housing when it’s still sound.
- Latches seized by Willamette Valley humidity. Cedar Hills gets months of rain. That moisture finds its way into Kwikset latch mechanisms and corrodes the spring. The knob turns but the latch won’t retract. We free the latch when it’s salvageable and replace it when the spring has rusted through.
- Deadbolts that catch on the strike every winter. Wood doors in Cedar Hills swell with seasonal moisture. The Kwikset deadbolt bolt shifts a few millimeters out of alignment with the original strike plate, and suddenly the door needs a body slam to latch. The fix is strike and jamb adjustment, not a new lock. We realign and reinforce.
- Frozen cylinders after a cold snap. When Cedar Hills gets ice, moisture inside an exposed Kwikset cylinder freezes. Forcing the key shears the older brass keyway pins. We extract the damaged cylinder and install a new one, then lubricate the assembly to handle the next freeze.
- Worn-out 1960s surface-mounted locksets. Many original Cedar Hills front doors still carry the builder’s original surface-mounted locksets. By now the internal mechanisms are frequently past the point of holding a new pin kit. We open the case and give you an honest read: rekey it, or replace it.
Kwikset Service in Cedar Hills: What Local Conditions Mean for Your Equipment
Here’s what makes Cedar Hills different from Beaverton, Aloha, or even Tualatin when it comes to Kwikset work, and why we also offer Kwikset repair in West Slope. This is a mid-century suburb, not a newer development. The vast majority of homes and small commercial buildings went up between the late 1950s and early 1970s, and a significant number of those front doors still have the original brass or aluminum lock hardware the builder installed. That hardware was never designed to last fifty years. The internal cylinders, latches, and strike assemblies are simply at the end of their mechanical life. This is the defining jobsite reality in Cedar Hills: locksmith work here is dominated by rekeying and retrofitting aging original hardware, not installing new locks. A homeowner near Cedar Hills Blvd may call thinking they need a quick rekey after a tenant moves out, but the real job is often making a half-century-old lock function and meet modern security expectations without replacing the door itself. Rental turnover along Cedar Hills Blvd and Highway 10 keeps rekey demand steady, but the technical work underneath that demand is what separates a careful locksmith from a quick one.
We see it weekly. A ranch-home owner called because her original Kwikset 400 Series entry knob had gone stiff and the key would barely turn after the fall rains. Our tech pulled the cylinder and found the brass chambers worn and the latch corroded from years of damp weather. We replaced the cylinder with a genuine Kwikset unit, installed a new latch, and reinforced the strike on the swollen wood door so it latched cleanly without slamming. That’s the typical Cedar Hills Kwikset call. What looks like a ten-minute rekey turns into a cylinder swap because the mechanism was used up before we arrived.
If you have an original 1960s Kwikset knobset in Cedar Hills, be prepared for the honest possibility that a rekey won’t hold. We’ll tell you before we start, not after you’ve paid for a pin kit that fails in three months.
Kwikset Models & Products We Service in Cedar Hills
We service the full Kwikset residential line, with particular depth on the models Cedar Hills homes actually have. The 400 Series Signature knobsets and 660 and 780 single-cylinder deadbolts that dominate 1960s and 70s ranches. The Kevo and Halo touchscreen and smartphone locks that newer buyers have retrofitted. And the SmartCode 913 and 914 keypad deadbolts we install regularly on both homes and rental units.
Our parts policy is straightforward. We use genuine Kwikset OEM cylinders, pin kits, and latches wherever the original housing is sound. When the internal mechanism is worn past rekeying, we use quality aftermarket cylinders or full locksets and tell you the difference before we order anything. On original 1960s buildersets, we often recommend full replacement because the cost of chasing a worn cylinder is higher than the cost of a new lock that will actually hold a key. We carry the common OEM parts for fast Cedar Hills turnaround, and we’re not precious about brand loyalty when a replacement is the smarter move.
Kwikset Service Pricing in Cedar Hills
Kwikset lock rekeying in Cedar Hills typically runs $25 to $75 per lock depending on the cylinder condition and whether we’re keying multiple locks to match. Deadbolt installation runs $75 to $150 per deadbolt, which includes the hardware, labor, and strike alignment. A full lock change on an older door runs $100 to $200 per opening, more if the jamb needs reinforcement or the existing mortise pocket needs reworking. Same-day emergency Kwikset service carries a trip fee that’s quoted before we dispatch, and there is no call-out surcharge added on arrival.
Every job starts with a free phone estimate. You’ll get the full price quoted before anyone is dispatched, and that’s the price on the invoice. For an exact quote, call (855) 473-5097. We’ll tell you what it costs before we touch anything.
Serving Cedar Hills, OR — Our Local Coverage Area
We’re based in the Cedar Hills area and know this community well, and we also handle Kwikset repair in Raleigh Hills. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kwikset Locksmith in Cedar Hills
Sometimes we can rekey it, and sometimes the cylinder is too worn to hold a fresh pin kit. Original 400 Series Kwikset cylinders have been in service for 50-plus years in Cedar Hills, and many of them have loose pin stacks and worn chambers. We’ll open the cylinder and check the wear before we commit. If it can’t hold a rekey, we’ll show you and recommend a genuine Kwikset replacement cylinder or a full lockset instead of charging you for a job that fails. Call (855) 473-5097 and we’ll give you a straight read.
In Cedar Hills, it’s usually both. Willamette Valley damp swells the wood door, which pushes the deadbolt bolt out of alignment with the worn strike plate. At the same time, moisture can corrode the latch spring. We check the alignment first, adjust or replace the strike, and inspect the latch for corrosion. The fix is usually strike and jamb adjustment, not a new lock. Call (855) 473-5097 and we’ll diagnose it on site.
Yes. SmartCode 913 and 914 keypad deadbolts retrofit onto most 1960s and 70s doors with standard 2⅛-inch bore holes. The work usually includes aligning the strike to the new bolt and sometimes reinforcing the jamb because the original wood has dried and split over decades. We stock common SmartCode models and install them with proper alignment so the bolt throws cleanly. Call (855) 473-5097 for an installation quote.
Moisture inside the cylinder freezes when Cedar Hills gets ice, and that’s what prevents the key from turning. The older brass keyway pins are brittle, and forcing the key can shear them. If the key won’t turn, stop forcing it. We extract the frozen or damaged cylinder, install a new one, and lubricate the assembly so it handles the next freeze. Call (855) 473-5097 and we’ll fix it without wrecking the rest of the hardware.
Yes, as long as the cylinders are still mechanically sound. We key all your Kwikset locks to a single key, which is exactly what landlords and property managers in Cedar Hills ask for between tenants. If one cylinder is too worn to hold the new pin kit, we’ll replace just that cylinder and key it to match everything else. Call (855) 473-5097 for a per-lock quote; we’ll survey the doors and give you a flat number before we start.
Service Areas Near Cedar Hills
We serve Cedar Hills and the surrounding communities across the west side, including Beaverton, Aloha, and the Highway 26 corridor. Our Kwikset sales & service work also extends to Kwikset service in Tualatin and Kwikset service in Beaverton for customers with rental portfolios or multiple properties nearby. If you’re in the 97005 ZIP or anywhere along Cedar Hills Blvd, we’re minutes away. See our Cedar Hills service area for full coverage details.
Book Your Kwikset Service in Cedar Hills Today
Need a rekey, a deadbolt installed, or an original 1960s Kwikset knobset assessed? Call (855) 473-5097 for a free estimate and a straight answer. Same-day service is available for most Kwikset calls in Cedar Hills, including lockouts and frozen cylinders.
Written by Glen Macready, Owner at Commodore Locksmith, serving Cedar Hills, Kwikset in West Haven-Sylvan, and the greater Portland metro area.