Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Gladstone, OR | Commodore Locksmith
We service and repair Medeco locks across Gladstone, Oregon, and the thing that sets our Medeco work apart here is simple: most “failed” Medeco cylinders in this town are actually door-alignment problems, not lock failures. Decades of wet Willamette Valley winters swell the wood frames on Gladstone’s post-WWII ranch homes, throwing doors out of square and binding deadbolts that are mechanically fine. We’re an independent Medeco sales & service shop, not manufacturer-affiliated, so we diagnose the whole door before touching the cylinder. Call (855) 473-5097 for Medeco service anywhere in the 97027 ZIP.
Why Gladstone Residents Choose Us for Medeco Service
Medeco hardware is a different animal than the Kwikset and Schlage locks most locksmiths cut their teeth on. The rotating pins, sidebar, and restricted keyways demand a level of familiarity you only get from working on them repeatedly. We do. Glen Macready, our owner, came up through the vocational locksmith programs at Mt. Hood Community College and spent years working every lock situation the Portland metro area could throw at him before starting Commodore Locksmith. His crew knows the pin stacks and sidebar mechanics of Medeco Biaxial, M3, and Original cylinders well enough to service them without swapping out a good lock. Around here, that matters, because Gladstone’s older homes still carry a surprising amount of Medeco hardware on original wood-frame doors. We keep genuine Medeco OEM pins, springs, and sidebar parts stocked locally so a our Emergency Locksmith in Gladstone job doesn’t wait on a parts shipmentt from across the country. If the lock is giving you trouble, that’s what we’re here for.
Styles & brands we work with







Common Medeco Locksmith Problems We Solve in Gladstone
- Restricted-keyway cylinders that bind and feel frozen. This is the big one in Gladstone. The wet-season swelling throws the door out of square, the strike misaligns, and the cylinder gets blamed for a frame problem. We check the strike and hinge side before ever opening the lock body.
- Biaxial and M3 cylinders that hang up or skip. The hardened rotating pins and sidebar collect grit and dried lubricant over years of exposure to damp air. Exterior doors on Gladstone’s older homes are especially prone. A proper teardown, clean, and re-lube with the right product usually restores smooth operation.
- Original-series Medeco keyways with sluggish or sticking keys. Decades-old front-door cylinders that never got serviced end up with dry or corroded tumbler stacks. The key goes in, but the turn feels gritty or stiff. We rebuild the stack with OEM pins rather than telling you to replace the lock.
- Deadbolts wearing at the bolt tip and cylinder face. Cheap or mismatched strike plates and sagging hinges on mid-century doors put sideways load on a Medeco deadbolt. Medeco builds for that abuse, but eventually the bolt tip and cylinder face show the wear. We fix the underlying alignment and replace only what’s actually worn.
- Sticky deadbolts that are really seasonal swelling. Every fall and spring, Gladstone doors move. A deadbolt that worked fine in August might not throw in February. We see this on a recurring basis, not as a one-time install call, and we fix it by addressing the frame, not just the hardware.
Medeco Service in Gladstone: What Local Conditions Mean for Your Equipment
Gladstone is a compact city of roughly three square miles wedged between Oregon City and Milwaukie along the Clackamas/McLoughlin corridor. That small footprint changes how Medeco work plays out here. Restricted-keyway Medeco service that would mean two trips in a bigger market, one to diagnose and one to return with parts or a cut key, can often be handled on a single route. And because Gladstone’s housing stock skews post-WWII through 1970s ranch and split-level homes, most of that Medeco hardware sits on original wood-frame doors that have spent fifty or sixty years absorbing Willamette Valley moisture. The result is a very specific call pattern: a Gladstone homeowner calls about a Medeco deadbolt that “quit working,” and what we usually find is a door that swelled out of square and bound the bolt against the strike. The lock itself is often fine. We realign the strike plate, snug the hinge screws, and only then service the cylinder if it actually needs it. That’s the local knowledge you’re paying for, and it’s why a quick visual check beats a cylinder swap nine times out of ten here.
Medeco Models & Products We Service in Gladstone
We work on the full Medeco lineup that you’re likely to find on Gladstone doors: the Medeco Maxum deadbolt, the Medeco M3 in both traditional and deadbolt cylinder formats, the Medeco Biaxial cylinder, and the classic Medeco Original rotating-pin cylinder. Parts matter on these. We use genuine Medeco OEM pins, springs, sidebar components, and restricted key blanks whenever they’re available, because aftermarket internals don’t hold the tolerances these cylinders require. If a worn Medeco cylinder can be rebuilt with OEM parts, we rebuild it rather than sell you a downgrade. If it can’t, we’ll tell you that straight and show you your options, including new Medeco high-security deadbolt installation.
Medeco Service Pricing in Gladstone
Medeco service in Gladstone typically runs as follows: a service call and cylinder teardown, clean, and re-lube generally lands in the $85 to $150 range; a full cylinder rebuild with OEM pins and springs runs $120 to $200 depending on the cylinder type; cutting a restricted Medeco key runs $15 to $35 per key after keyway verification; and a new Medeco Maxum deadbolt installed starts around $180 to $300 depending on door prep and finish. What drives the cost is whether the cylinder needs a simple cleaning or a full rebuild, and whether the door itself needs alignment work. Every estimate is free, and the price we quote on the phone is the price on the invoice, no call-out surcharge added on arrival. Call (855) 473-5097 for an exact quote on your lock.
Serving Gladstone, OR — Our Local Coverage Area
We’re based in the Gladstone area and know this community well, and we also provide Car Key Replacement in Gladstone. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Gladstone
Usually not. In Gladstone, the most common cause is a door that’s swelled out of square from wet-season moisture, which misaligns the strike and binds the bolt. Our tech checks the strike and hinge side first, and a surprising number of “bad” Medeco locks just need alignment work, not cylinder work. Call (855) 473-5097 and we’ll diagnose it properly.
Yes, if you have the proper authorization. Medeco restricted keyways are controlled for a reason, so we’ll verify you’re the property owner or authorized manager before cutting. We use genuine Medeco restricted key blanks, and we can cut them same day in most Gladstone cases, often on the same route since the city is so compact.
Most Original-series Medeco cylinders can be rebuilt. If the tumbler stack is dry or corroded and the keyway is worn but the cylinder body is sound, we rebuild it with OEM pins and springs for a lot less than a new cylinder would cost. We only recommend replacement when the cylinder body itself is damaged or the keyway is too worn to hold tolerances.
That’s the Gladstone climate at work. The Willamette Valley’s wet, mild winters make wood doors and frames swell, and the hardware absorbs moisture and corrosion over time. Your Medeco cylinder isn’t wearing out, it’s fighting a door that’s moved. We can realign the strike and service the cylinder so it stops being a seasonal problem. Call (855) 473-5097 and we’ll sort it before the next wet stretch.
Yes, and we do it regularly. Older ranch doors sometimes need strike reinforcement or minor prep work to seat a Medeco Maxum properly, but that’s routine for us. We’ll quote you a flat price before any work starts, and we install with OEM hardware so the cylinder performs the way Medeco designed it to.
Service Areas Near Gladstone
Gladstone sits on the Clackamas/McLoughlin corridor with easy access to the surrounding eastside. We run Medeco service out to Gladstone service area neighborhoods plus Medeco service in Jennings Lodge just north, Medeco service in Oak Grove toward Milwaukie, and up the corridor into Gresham, Happy Valley, and the communities around them. If you’re near the 97027 line, call and we’ll confirm coverage.
Book Your Medeco Service in Gladstone Today
Need a Medeco cylinder rebuilt, a restricted key cut, or a new high-security deadbolt on your Gladstone door? Call (855) 473-5097 for a free estimate. We run Medeco calls across Gladstone and the 97027 ZIP, and Medeco in West Linn is also in our service area, with same-day service often available given how compact the city is.
Written by Glen Macready, Owner at Commodore Locksmith, serving Gladstone and the Portland metro area.