Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in King City, OR | Commodore Locksmith
We provide independent Medeco locksmith service across King City (97224), from rekeying and cylinder rebuilds to lockout response and patio-door hardware, plus Stafford Medeco service. What makes our Medeco work different here is simple: King City’s aging single-story homes and damp Willamette Valley winters treat high-tolerance Medeco hardware differently than newer construction, and we’ve been solving that specific set of problems long enough to know exactly what a stuck key means in this community. If you need Medeco service in King City, call (855) 473-5097 for a free estimate.
Why King City Residents Choose Us for Medeco Service
Medeco’s restricted keyway and rotating-pin technology is unforgiving of sloppy work. Our bench has cut and serviced Medeco cylinders and keyways long enough to know the difference between a spec-built lock and a pin job that voids its security. We’re an independent shop, not authorized by Medeco, but we stock genuine Medeco cylinders, keys, and pins, and we can match or exceed the factory build on any Medeco lock in King City. Glen Macready runs Commodore Locksmith, and he grew up in the Centennial neighborhood of Gresham. He picked up the trade through the vocational programs at Mt. Hood Community College, then spent years working through every lock situation the Portland metro area could throw at him. Around here, people know him as the guy who doesn’t oversell and doesn’t leave until the job is done right. His daughter learned on weekend ride-alongs that a busted deadbolt at 11 p.m. is just a Tuesday.
Styles & brands we work with







Common Medeco Locksmith Problems We Solve in King City
- Corrosion and seizure from Willamette Valley dampness. Medeco’s tight-tolerance brass and hardened rotating pins bind after a few damp seasons if the exterior deadbolt isn’t lubricated. A key that turned fine last fall won’t turn in January. We pull the cylinder, clean it, re-pin if needed, and get it working again, usually without replacing the whole lock.
- Swollen wood doors straining the deadbolt throw. Many King City homes were built in the 1970s and 80s with original wood frames. Wet winters swell those frames, so a Medeco Maxum deadbolt’s throw drags against the strike and the thumbturn gets stiff. Residents often think the lock is broken. It’s usually the door, but the fix requires adjusting the strike and sometimes the cylinder alignment.
- Worn keyways and pin stacks on original cylinders. Repeated use over 30 or 40 years can round the sidebar or wear the rotating pins inside an older Medeco cylinder. The call comes in as “my key catches and won’t turn,” and it reads like a lockout, but it’s really a tired cylinder. We re-pin and lubricate before we ever recommend replacement.
- Restricted keyway lockouts and lost keys. A Medeco key duplicated on a big-box machine won’t work in a restricted keyway. If a resident loses the original and only has a bad copy, or loses the key entirely, rekeying requires a genuine Medeco blank, which we stock in King City. No waiting on a mail-order blank.
- Sliding-glass patio door locks on older units. Original patio doors on 1970s and 80s King City homes often need a specialized lock or an upgrade to meet the security level of the rest of the home. We service Medeco-equipped patio doors and can add a secondary lock where the original hardware has failed.
Medeco Service in King City: What Local Conditions Mean for Your Equipment
King City is one of Oregon’s newest cities, incorporated in 1966, and it’s dominated by a single large, master-planned active-adult community: the King City Civic Association. The homes here were mostly built between the late 1960s and the 1980s, and many still have the original builder-installed door frames, lightweight wood doors, and aging hardware. That matters for Medeco owners. The King City Civic Association’s population is overwhelmingly older adults living alone, so a stuck Medeco key is often an aging-hardware or swollen-door problem rather than a true lockout, and that call needs a patient, no-rush rekey or repair rather than a forced entry. We respond accordingly. A resident in the King City Civic Association area called us about a Medeco Maxum deadbolt that wouldn’t turn on a damp January afternoon. Our tech found the bolt dragging against a swollen wood door and the cylinder dry and seized. We lubricated and re-pinned the genuine Medeco cylinder, adjusted the strike, and handed back a smooth-turning key without selling a new lock. We also checked the neighboring patio door and recommended a specialized sliding-glass lock before the next rain season. That’s the kind of service King City residents tell their neighbors about.
If the lock is giving you trouble, that’s what we’re here for.
Medeco Models & Products We Service in King City
We service the full range of Medeco hardware you’re likely to find on King City homes: the Medeco Maxum deadbolt, the original Medeco high-security cylinder with bi-level and UL 437 keyway, the Medeco M3 and M4 high-security cylinders, and the Medeco eCylinder electronic cylinder. We use genuine Medeco cylinders, key blanks, pins, and sidebars for any high-security repair. Aftermarket hardware is reserved only for non-Medeco support pieces like strikes and reinforcements. On a worn Medeco cylinder, we’ll re-pin and lubricate before recommending replacement, and we only replace when the sidebar or keyway is genuinely worn out. For Medeco sales & service, we carry what King City homes actually need, on the truck, ready to go.
Medeco Service Pricing in King City
Medeco service in King City runs on honest, flat-rate pricing quoted on the phone before anyone is dispatched. A standard service call for a Medeco lock typically runs between $180 and $340 depending on what’s found, and a simple rekey of an existing Medeco cylinder is usually under $200. If the cylinder needs re-pinning, sidebar work, or new restricted key blanks, the price adjusts accordingly, and we tell you what changed and why before we start. We don’t add a call-out surcharge when we arrive. The price you’re quoted is the price on the invoice. We are not authorized by Medeco, so we don’t upsell factory programs, and we don’t need to. Call (855) 473-5097 for a free estimate, and we’ll walk you through what’s likely going on with your lock before we even schedule the visit.
Serving King City, OR — Our Local Coverage Area
We’re based in the King City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help. We also provide Tigard Medeco service.
FAQs – Medeco Locksmith in King City
Can you rekey a Medeco lock in King City, or do I need to replace it?
You can almost always rekey a Medeco lock in King City without replacing it. A genuine Medeco cylinder is built to be re-pinned and rebuilt, and we stock the genuine Medeco pins, springs, and key blanks needed to rekey your existing hardware. Replacement is only the answer when the sidebar or keyway is worn beyond what new pins can correct. Call (855) 473-5097 and we’ll tell you which situation you’re in.
My Medeco key turns hard in the winter – is the lock failing?
Not usually. What you’re describing is most often corrosion from Willamette Valley dampness, or a swollen wood door pressing the deadbolt against the strike. Medeco cylinders run on tight tolerances, so a little internal grime or a shifted door frame makes a big difference. We clean, lubricate, and adjust before we ever talk about a new lock. Talk to us about what’s happening at (855) 473-5097 – free estimate, no obligation.
Do you carry Medeco keys, or do I have to order them?
We carry genuine Medeco key blanks on the truck for King City jobs. Restricted Medeco keyways can’t be duplicated at a hardware store or big-box machine, and that’s exactly the problem. We cut and program your Medeco keys on site, so you’re not waiting a week for a blank to ship. Need an extra key or a full rekey? Call us at (855) 473-5097.
Is a Medeco lock overkill for a single-story patio home in a King City active-adult community?
Not at all. The King City Civic Association is a quiet, low-crime area, but that’s not the point of a Medeco lock. The point is that you can’t duplicate the key at a kiosk, and that’s real control over who has access to your home, especially for residents who’ve had caregivers, contractors, or family members with keys over the years. For a solo resident, restricted key control is often more valuable than a bigger deadbolt. We’ll help you decide what fits. Call (855) 473-5097 to talk it through.
Can you service a Medeco lock on a sliding-glass patio door in King City?
Yes, we can. Many King City patio homes have older sliding-glass doors that need specialized lock work. We service Medeco-equipped patio doors, and we can add a secondary lock where the original hardware has failed. We’ll also check the track, rollers, and strike alignment for the wet-season swelling that causes patio-door locks to bind. Call (855) 473-5097 for an exact quote.
Service Areas Near King City
Our Medeco service covers King City and the surrounding metro, including Gresham, Wood Village, Fairview, Troutdale, Damascus, and Happy Valley. We also work in King City service area communities throughout 97224. For nearby coverage, see our Medeco service in Oak Hills and Medeco service in Mulino pages.
Book Your Medeco Service in King City Today
If you need Garden Home-Whitford Medeco service or help in King City, call (855) 473-5097. We’ll quote a flat price on the phone before anyone is dispatched, and we’ll send a tech who knows these locks and this city. Same-day service is available for lockouts and urgent repairs.
Written by Glen Macready, Owner at Commodore Locksmith, serving King City, Medeco service in Metzger, and the Portland metro area.