Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateKwikset Locksmith in Hubbard, OR | Commodore Locksmith
We provide Hubbard Car Key Replacement and independent Kwikset locksmith service across Hubbard, OR, from rekeying original entry sets on pre-1970 farmhouses to repairing SmartKey deadbolts that jam after a wet Willamette Valley winter. The thing that makes our Kwikset work here different is that we’re not just swapping cylinders: we’re often called to Hubbard properties with three or four detached buildings carrying mismatched locks, and the job becomes creating one key plan for the whole property. Call us at (855) 473-5097 and we’ll tell you up front what the fix will cost.
Why Hubbard Residents Choose Us for Kwikset Service
We work on Kwikset hardware every week in the Willamette Valley, from original Kwikset entry sets on mid-century Hubbard homes to newer SmartKey deadbolts, and we also handle Wilsonville Kwikset service calls. That means we know how these locks age in wet-winter conditions, and we know which failures are worth repairing versus replacing. Glen Macready, the owner behind Commodore Locksmith, learned the trade working his way through every lock situation the Portland metro area could throw at him, and that experience shows when a SmartKey cylinder won’t accept a key or a deadbolt binds on a swollen door.
We’re an independent locksmith, not affiliated with or authorized by Kwikset. We service and repair their products because we know them well, and because half the homes in Hubbard still carry some version of a Kwikset lock. When you call us, you get a straight answer: OEM parts when the lock is still serviceable, honest advice when it isn’t. Learn more about our Kwikset sales & service experience across the region.
Styles & brands we work with
Common Kwikset Locksmith Problems We Solve in Hubbard
- SmartKey cylinders that jam or stop accepting the key. We see this on Hubbard houses where someone attempted a DIY rekey with the SmartKey reset tool and debris got into the slider, or the cylinder was forced. This is a repair we do regularly, and it beats replacing the whole deadbolt.
- Deadbolts that bind when the wood door swells. Hubbard’s wet winters cause wood doors to swell and stick, so the key turns but the bolt won’t throw. We adjust the strike, file where needed, and get the bolt moving cleanly again.
- Worn pin-tumbler cylinders and keys on 40-plus-year-old entry sets. On original Kwikset hardware from Hubbard’s pre-1970 housing stock, both the key and the pins are often rounded from decades of use. A rekey with a fresh Kwikset cylinder and new keys solves it.
- Deadbolts on hollow-core or lightly framed doors that were never reinforced. Older Hubbard homes often have Kwikset deadbolts on doors that split easily under force. We install strike plates and reinforcement hardware so the deadbolt actually does its job.
- Mismatched locks across house, shop, and garage. This is the Hubbard signature. Many properties here were built with an original Kwikset entry set, then had detached shops and garages added later with whatever lock was on hand. We key everything to match.
Kwikset Service in Hubbard: What Local Conditions Mean for Your Equipment
Hubbard’s housing is dominated by pre-1970 single-family homes and older farmhouses on large lots, and many still carry their original mortise locks alongside detached shops and garages that were added without a consistent keying system. In practice, that means a single-property job in Hubbard commonly involves creating one plan for several mismatched Kwikset and legacy locks rather than rekeying one door. We were called to a farmhouse property on a large in-town Hubbard lot where the front door wore an original Kwikset entry set that no longer turned smoothly and the detached shop door had a mismatched brand the family had never had keyed together, similar to Kwikset service in Canby properties we handle. After the wet-winter swelling had bound the front deadbolt, we rekeyed the Kwikset cylinder, filed and adjusted the strike so the bolt threw cleanly, and keyed the shop and garage doors to the same Kwikset key: one key for the house, shop, and outbuildings.
That’s not a job most locksmiths in the region see every day. In Hubbard, it’s a Tuesday. The wet winters make every wood door move, and the older the house, the more the door has moved over the decades. If you have an original Kwikset entry set and a shop on a different key, we can sort it out, just as we do with Kwikset in Donald and surrounding areas.
Kwikset Models & Products We Service in Hubbard
We carry service parts for the Kwikset 660 and 665 single-cylinder deadbolts, the SmartKey entry handlesets and deadbolts, and the Tustin and Juno knob and lever lines that were standard builder-grade installs for decades. We also work on the 400 Series and traditional pin-tumbler entry locks, which are common on Hubbard’s older farmhouses.
Our approach to parts is simple: we match OEM Kwikset cylinders, keys, and SmartKey components whenever the lock is still serviceable. We use quality aftermarket hardware only when an OEM part is discontinued or a full replacement is the honest call. On aging builder-grade Kwikset knobs and deadbolts, we’ll tell you straight when a fresh cylinder or a grade-appropriate deadbolt makes more sense than chasing worn parts. If the lock is giving you trouble, that’s what I’m here for.
Kwikset Service Pricing in Hubbard
Here’s what you can expect for common Kwikset work in Hubbard:
- Kwikset SmartKey rekey: $25-$45 per cylinder, plus the service call
- Kwikset cylinder replacement: $35-$70 per cylinder, depending on model and finish
- Kwikset deadbolt installation: $65-$140 per deadbolt, including labor
- Door reinforcement (strike plate and jamb): $40-$90 per door
- Full-property rekey (house, shop, garage): $85-$220, depending on cylinder count
What drives the cost is cylinder count, lock condition, and whether we’re repairing or replacing. Every job starts with a free estimate over the phone, and the price we quote is the price on the invoice. No call-out surcharge added when we arrive. Call (855) 473-5097 for an exact quote on your Kwikset work in Hubbard.
Serving Hubbard, OR — Our Local Coverage Area
We’re based in the Hubbard area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs: Kwikset Locksmith in Hubbard
Yes, in most cases we can rekey a SmartKey lock on site, as long as the cylinder isn’t jammed or damaged from a botched DIY attempt. If the SmartKey slider has debris in it or the reset tool was misused, we can often clear and reset it without replacing the whole deadbolt. If the cylinder is beyond saving, we’ll tell you before doing the work. Call (855) 473-5097 and we’ll give you a straight answer.
The most common culprit in Hubbard is wood door swelling from the wet Willamette Valley winters, which binds the deadbolt or latch so the key turns but the bolt won’t throw. Older hollow-core doors are especially prone to it. We adjust the strike and align the hardware so the lock works through the cold months. For a quick diagnosis and a free estimate, call (855) 473-5097.
Yes, this is one of the most common jobs we do in Hubbard, given the number of older farmhouses with detached shops and garages added later. We can key all the Kwikset locks, and most legacy locks, to a single key so you’re not carrying a ring of mismatched keys. It’s a rekey job, not a replacement job, and it costs less than buying new hardware for every door. Call (855) 473-5097 for a quote tailored to your property.
Yes. We regularly see Kwikset deadbolts on Hubbard homes that were never reinforced, so the bolt can split the jamb under force. A reinforced strike plate and jamb make the deadbolt actually hold. It’s a modest addition that we install while we’re already on the property. Call (855) 473-5097 and we’ll assess your door as part of the estimate.
No, we’re an independent locksmith. We’re not affiliated with or authorized by Kwikset, and we don’t claim to be. In practical terms, most Kwikset hardware that’s out of the original warranty period is serviced by independent locksmiths like us, and the parts we use are OEM Kwikset components whenever available. If warranty questions matter for a recent install, we’ll point you to the right channel before any work starts. For everything else, call (855) 473-5097 and we’ll get it sorted.
Service Areas Near Hubbard
We serve Hubbard and the surrounding communities including Woodburn, Gervais, Donald, Aurora, and Canby. For Kwikset work a little farther north, see our Kwikset service in Newberg page. If you’re northwest of Hubbard, check Kwikset service in Warren for coverage details. And for the full overview of where we work, visit our Hubbard service area page.
Book Your Kwikset Service in Hubbard Today
If a Kwikset lock on your Hubbard property is jamming, binding, or just plain worn out, call us. We’ll give you a straight diagnosis and a free estimate over the phone at (855) 473-5097. Same-day service is available for most Kwikset repairs and rekeys in Hubbard.
Written by Glen Macready, Owner at Commodore Locksmith, serving Hubbard and the Willamette Valley.