Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateKwikset Locksmith in King City, OR | Commodore Locksmith
We provide independent Kwikset locksmith service across King City, OR: rekeys, deadbolt installs, and urgent lockout help for the original builder-grade Kwikset locks still in place in the King City Civic Association area. What makes our Kwikset work here different is that we’ve seen how these 1970s and 1980s locksets age in Willamette Valley damp, so we know which failures are worth repairing and which need real replacement hardware. Call (855) 473-5097 anytime you’re stuck at a door.
Why King City Residents Choose Us for Kwikset Service
Most King City homes were built between the late 1960s and the mid-1980s, and a striking number still carry their original Kwikset or Weiser knob locksets. That’s our working landscape. Commodore Locksmith is an independent Kwikset service provider, not a manufacturer-affiliated shop, which means we stock genuine Kwikset cylinders, knobs, and deadbolt assemblies while staying free to tell you when a different brand or a simple rekey makes more sense. We also offer Kwikset in Tigard and surrounding areas. We also work across the full security spectrum, from Schlage and Yale up through Medeco, Mul-T-Lock, Sargent, and Abloy, so when a King City resident asks whether their old Tylo knob is worth saving, our answer comes from working on locks at every grade. Glen Macready grew up in Centennial and learned the trade through the vocational programs at Mt. Hood Community College, then spent years handling every lock situation the Portland metro area could throw at him. Around King City, we’re just as likely to be called for a rain-locked patio door as for a lost key.
Styles & brands we work with
Common Kwikset Locksmith Problems We Solve in King City
- Seized Kwikset Tylo knob cylinders. The original Tylo knob lockset shows up all over King City’s ranch and patio homes. After forty-plus years of Willamette Valley rain, the internal cylinder corrodes and the key either won’t turn or turns with brutal resistance. Often the lock isn’t truly locked out at all; the cylinder is simply worn and wet. We clean, lubricate, and rekey these when the mechanism still has life in it.
- SmartKey cylinders that bind or refuse to rekey. Kwikset SmartKey knobs and deadbolts are convenient until moisture intrudes and the internal wafers start to hang. On exterior doors that face the prevailing rain in King City, we regularly see SmartKey locks that won’t accept the learning tool or that rekey but then feel gritty. We’ll diagnose whether a deep cleaning saves it or whether a replacement cylinder is the better move.
- Builder-grade deadbolts pulling loose at the strike plate. Most King City homes were built with lightweight hollow-core or thin wood doors. A Kwikset 660 Series deadbolt mounted on one of these doors loosens over time, the strike plate screws strip, and the bolt drags or fails to fully extend. The fix is usually reinforcing the plate and realigning the bolt path, not replacing the door.
- Worn cam and spindle spin-out on original knob locks. When an aging Kwikset knob turns without retracting the latch, the cam or spindle has worn past tolerance. It’s a predictable failure on locks that have been turned thousands of times since the Reagan administration. We’ll replace the worn internal or recommend a modern deadbolt if the door needs more security than the old knob can provide.
- Sliding patio door locks that were never meant for the wet side of Oregon. King City’s patio homes lean heavily on sliding-glass doors from the original build. The built-in locks on these doors corrode and fail, and many residents call us assuming they need a whole new door. Often a quality auxiliary lock or a rekeyed handle set solves it.
Kwikset Service in King City: What Local Conditions Mean for Your Equipment
Here’s what a generic locksmith page won’t tell you: King City is one of Oregon’s newest cities, incorporated in 1966, but its housing stock is almost entirely late-1960s through 1980s builder-grade ranch and patio homes concentrated around the King City Civic Association neighborhood. That means most Kwikset locks here are not new smart-lock installs waiting to happen. They’re original Tylo knobs on lightweight doors, decades past their intended service life, living in a climate that delivers roughly 40 inches of rain a year. The wood swells. The strike plates drift. The cylinders corrode from the inside out. When a resident on a zero-lot-line lot tells us their key won’t turn, our first assumption is a seized original cylinder and a swollen door, and we’re right more often than not. We adjust, lubricate, and rekey in place whenever it’s safe to do so. When it’s not, we say so plainly and install a deadbolt that’ll actually hold.
We had a call from a woman in the King City Civic Association area who came home in the rain and couldn’t turn the key in her original Kwikset Tylo knob. The cylinder was seized from years of moisture, and the wood door had swollen in its frame. We cleaned and lubricated the mechanism, rekeyed it to a fresh key, and adjusted the strike plate so the door latched smoothly without replacing the whole lockset. She’d been told by another locksmith that she needed all-new hardware. She didn’t. That’s the difference between Kwikset repair in Metzger expertise and someone who merely knows the brand.
Kwikset Models & Products We Service in King City
We service the full range of Kwikset hardware found in King City homes, with a deep bench on four model families specifically: the Kwikset Tylo knob lockset, the 660 Series single-cylinder deadbolt, the SmartKey rekeyable knob and deadbolt sets, and the 980 Series Signature Series deadbolt. We use genuine Kwikset OEM cylinders, knobs, and deadbolt assemblies for direct replacements when a like-for-like swap is called for. When an aftermarket cylinder or a heavier strike plate offers better corrosion resistance for a King City exterior door, we’ll recommend that instead and explain exactly why. We keep common Kwikset cylinders and replacement parts on hand so a standard King City rekey or deadbolt swap doesn’t turn into a two-trip job.
Kwikset Service Pricing in King City
Kwikset lock rekeying in King City typically runs between $75 and $160 depending on how many cylinders are involved and whether we’re also correcting a strike plate or swollen door. A straightforward deadbolt installation, hardware included, generally falls between $160 and $300. Lockout service where the lock itself is functioning but the key is lost or the cylinder is seized starts around $95 to $160. What drives the number is cylinder count, door condition, and whether the existing prep needs reinforcement. We quote the full price on the phone before we dispatch, and that’s the price on your invoice, with no call-out surcharge added on arrival. Call (855) 473-5097 for a firm quote on your specific King City property, and we’ll walk you through what we can do over the phone before we ever roll a truck.
Serving King City, OR — Our Local Coverage Area
We’re based in the King City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kwikset Locksmith in King City
In most King City homes built between the late 1960s and the 1980s, a key that suddenly won’t turn in an original Kwikset knob is usually a worn cylinder that has seized from corrosion, often made worse by a wood door that swells during the wet season. We’ll determine whether cleaning, lubrication, and rekeying will restore it or whether the internal mechanism is past saving. Call (855) 473-5097 and we’ll give you an honest assessment.
Yes, in most cases we can rekey a SmartKey cylinder on the spot, but if moisture has gotten inside and the wafers are binding, forcing the rekey can damage it further. We’ll tell you after opening it up whether it’s cleanable or whether a replacement cylinder is smarter. Call (855) 473-5097 to schedule a King City SmartKey service call.
King City’s damp winters push moisture into locksets and into the wood door itself. The wood swells, the strike plate shifts slightly, and the cylinder internals get gummed with corrosion. Annual lubrication helps, but the root fix is often aligning the strike plate and cleaning the cylinder. We do that as a standard part of our King City rekey visits.
We do. Many of the original Tylo knobs in King City’s patio homes offer minimal security even when they work perfectly. A Kwikset 660 Series or 980 Series deadbolt installed above or in place of the old knob is the standard upgrade, and we’ll match the finish and door prep so the change looks intentional, not patched.
Yes. We prioritize single-resident lockouts in King City because we know how many residents in the Civic Association area live alone. We’ll get to you, open the Kwikset lock without wrecking the door, and if you’d like, rekey it on the spot so you have a fresh set of keys before we leave. Call (855) 473-5097 and we’ll head your way.
Service Areas Near King City
From our base in the Portland metro area, we run Kwikset service calls into King City and the surrounding communities. We handle rekeys, lockouts, and deadbolt installs in Kwikset service in Oak Hills, Kwikset service in Mulino, Gresham, Wood Village, Fairview, Troutdale, Damascus, and Happy Valley. If you’re just outside King City, call us and we’ll tell you straight whether we can get to you same day.
Book Your Kwikset Service in King City Today
Whether your original Tylo knob has seized in the rain or you’re ready to upgrade a builder-grade deadbolt before it fails, call Commodore Locksmith at (855) 473-5097 for a free estimate. If the lock is giving you trouble, that’s what Glen Macready and our team are here for. We run same-day service across King City and the nearby communities, and we’ll quote you the full price before we leave the shop.
Written by Glen Macready, Owner at Commodore Locksmith, serving King City and the Portland metro area.