Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Lents, OR | Commodore Locksmith
We provide independent Schlage locksmith service across Lents, Oregon, from rekeying a B60 deadbolt to retrofitting modern cylinders into the neighborhood’s older mortise doors, similar to our Happy Valley Schlage service. What makes our Schlage work different here is simple: we know how wet winters and 1920s-to-1970s door construction affect these locks, and we stock the parts to fix them right the first trip. Call (855) 473-5097 for a free phone estimate before anyone is dispatched.
We’re Commodore Locksmith, an independent shop serving Lents and the surrounding southeast Portland area. We are not affiliated with or authorized by Schlage. What we are is a team that has spent years rekeying and repairing Schlage hardware alongside Kwikset and Medeco, so we know where each brand holds up and where it doesn’t. For full details on our Schlage work, see our Schlage sales & service page.
Why Lents Residents Choose Us for Schlage Service
Most locksmiths can drill out a deadbolt and slap in whatever’s on the truck. That’s not how we work in Lents. When a Schlage cylinder seizes from years of damp air or a factory deadbolt tears out of a thin door edge, the fix comes down to knowing the specific hardware and the specific door. Our owner, Glen Macready, grew up in the Centennial neighborhood of Gresham and trained through the vocational programs at Mt. Hood Community College before spending years on locks all over the Portland metro area, including Milwaukie Schlage service. Around Lents, he’s known as the guy who doesn’t oversell and doesn’t leave until the lock works.
We carry genuine Schlage replacement cylinders and bolt assemblies for newer hardware, and we use quality aftermarket reinforcement plates and weather-resistant cylinders where an older door prep needs a different approach. The goal is a repair that lasts through Lents winters, not a quick swap that binds again by spring.
Styles & brands we work with







Common Schlage Locksmith Problems We Solve in Lents
- Seized exterior cylinders from prolonged wet weather. Lents sits west of the Cascades, so fall and winter keep exterior hardware damp for months. Schlage cylinders corrode internally, keys turn hard, and eventually snap in the plug. We drill and extract broken keys, replace the cylinder with a weather-resistant unit, and rekey to match the rest of the house.
- Deadbolts that bind because the door swelled. Wood-frame doors from the 1950s and 60s swell in wet months, shifting the strike alignment. A Schlage deadbolt throws but won’t fully seat, so the bolt wears against the strike plate. We adjust the strike, tune the alignment, and add a reinforcement plate where the door edge has softened.
- Factory B60 deadbolts that tear out of thin door edges. Many Lents doors from the 1920s through the 1970s have unsupported edges just over an inch thick. A Schlage B60 bolted into that edge without reinforcement eventually loosens or tears out under force. We add reinforcement plates and refit the bolt assembly so the hardware holds properly.
- Mortise locks on original interior doors. A surprising number of Lents homes still have interior doors with original mortise lock bodies. When the springs weaken or the tumblers wear, you can’t just swap a keyed knob. We retrofit a modern Schlage cylinder into the existing mortise prep, which keeps the door functional without ripping it apart.
- Keying multiple Schlage locks to one key. Whether it’s a new Encode smart lock on the front door or rekeying after a tenant change, we can key most Schlage cylinders alike so one key works the whole house. This is a common request from renters and landlords in Lents, where turnover and move-in security resets happen regularly.
Schlage Service in Lents: What Local Conditions Mean for Your Equipment
Lents still has a large share of original interior doors carrying mortise lock bodies and skeleton keys. That’s not a quirk you run into much in newer Portland neighborhoods, and it changes how Schlage work plays out here. When one of those old mortise bodies fails, the job isn’t a simple knob swap. The door prep is rectangular and recessed, not a standard 2-1/8″ round bore. So we retrofit a modern Schlage cylinder into that existing mortise prep, preserving the door’s original trim while giving you a contemporary keyway and tumbler set. It’s slower than a standard install, but it’s the right way to keep an older Lents home intact. In neighborhoods like the stretch around SE 92nd and Flavel, where many houses date to the 1930s through the 1950s, this is routine work for us, just as it is for our Jennings Lodge Schlage service. A locksmith who only knows modern round-bore doors will tell you to replace the whole door. We’d rather not butcher a solid fir door that’s been there for eighty years.
Schlage Models & Products We Service in Lents
We service the full range of Schlage residential hardware you’ll find on Lents doors. That includes the B60 and B62 single-cylinder deadbolts, the F-Series keyed entry knobs and levers (F51, F58 and related configurations), the Camelot and Plymouth trim collections, and the Encode and Sense smart locks. For older hardware where the original Schlage body is worth saving, we fit genuine Schlage replacement cylinders and bolt assemblies. When the prep is non-standard or the door edge needs structural work, we use quality aftermarket reinforcement plates and weather-resistant cylinders that suit the opening better than a full OEM swap. We keep common Schlage parts stocked locally so service in Lents doesn’t stall waiting on a parts shipment.
Schlage Service Pricing in Lents
Schlage locksmith service in Lents typically runs $85 to $160 for a standard rekey or cylinder service call, and $150 to $300 for deadbolt installation or retrofit work depending on the door prep and hardware condition. Corroded exterior cylinders and mortise retrofits land in that mid-to-upper range because the labor is slower and the cylinder replacement needs to be matched to the existing trim. What drives the cost: whether you need a full cylinder replacement or just a rekey, how much of the original hardware is worth saving, and whether the strike or door edge needs reinforcement. We quote the full price on the phone before anyone is dispatched, and that’s the price on the invoice. No call-out surcharge added on arrival. For an exact quote on your Schlage locks in Lents, call (855) 473-5097. Estimates are free.
Serving Lents, OR — Our Local Coverage Area
We’re based in the Lents area and know this community well, and we also provide Car Key Replacement – Lents. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Lents
My Schlage key turns hard every wet Portland winter – can a rekey fix that?
A rekey alone generally won’t fix it if the cylinder itself is corroded. The hard turning comes from internal corrosion or a swollen door throwing off the strike alignment. We’ll inspect the cylinder and the door fit, replace the cylinder with a weather-resistant Schlage unit if needed, and rekey it to match. Call (855) 473-5097 to walk through what you’re dealing with.
Can you put a modern Schlage deadbolt on my older Lents home’s wood door?
Yes, and we do it regularly. The older Lents doors that give people trouble are usually pre-1970s wood-frame doors with thin edges or mortise preps rather than standard round bores. We install the Schlage deadbolt, add a reinforcement plate where the edge is thin, and tune the alignment so the bolt seats fully in the existing strike. Call (855) 473-5097 for a free estimate on your specific door.
I have original skeleton-key interior doors – will a Schlage cylinder work in my mortise locks?
Yes. We retrofit a modern Schlage cylinder into the existing mortise prep, keeping the original door and trim. This is one of the most common jobs we do in Lents, and it’s a much better path than swapping the whole door just to get a modern keyway.
Does Schlage’s warranty cover a locksmith rekey?
Schlage’s manufacturer warranty covers defects in materials and workmanship on the hardware itself. A rekey performed by an independent locksmith isn’t a warranty repair, and because we’re an independent shop not affiliated with or authorized by Schlage, our work doesn’t extend or void the manufacturer’s coverage. We use genuine Schlage parts where the original hardware justifies it, so the integrity of the lock body stays intact.
Can you match my new Schlage deadbolt to the same key as my existing Schlage knobs?
Yes. Most Schlage cylinders, whether they’re on an F-Series knob, a B60 deadbolt, or an Encode smart lock, use the same keyway and can be keyed alike. We pin the new cylinder to match your existing key so one key runs the whole house. Call (855) 473-5097 for a quote on keying your Schlage hardware alike.
Service Areas Near Lents
Alongside our Lents service area, we run Schlage locksmith calls into nearby neighborhoods and cities. That includes Gresham, Wood Village, Fairview, Troutdale, Damascus, and Happy Valley. If you’re just outside Lents, call and we’ll tell you straight if we can get to you same day. We also keep expanded Schlage coverage in Schlage service in Clackamas and Schlage service in Oatfield.
Book Your Schlage Service in Lents Today
If the lock is giving you trouble, that’s what we’re here for. Call (855) 473-5097 for a straight answer and a free phone estimate on Schlage rekey, deadbolt installation, or retrofit work in Lents. Same-day service is available for most calls, and we’ll quote the full price before we dispatch anyone.
Written by Glen Macready, Owner at Commodore Locksmith, serving Lents and the Portland metro area.